Area gates

Technical data

Device dimensions (W × H × D)

• XRF-T.2 (Transmitter): 50 × 121 × 23 mm
• XRF-TI (transmitter): 18 × 194 × 18 mm
• XRF-R.1 (receiver): 50 × 121 × 23 mm
• XRF-R.2 (receiver): 75 × 121 × 24 mm
• XRF-RD (receiver): 22.5 × 94 × 91 mm
• XRF-TW (transmitter): 66 × 58 × 16 mm
• XRF-TW (Magnet): 66 × 17 × 16 mm

Electrical Specifications

Frequency

868 MHz

Transmitter XRF-T.2, XRF-TW

• Operating voltage: 3 V lithium battery (CR2450N)
• Battery life: Typically 1.2 years

XRF-TI Transmitter

• Operating voltage: 3.6 V inorganic lithium battery
• Battery life: Typically 7 years

Receivers XRF-R.1, XRF-R.2, XRF-RD

• Operating voltage: 12–36 V AC / 48–62 Hz
  12–36 V DC
• Power consumption: Max. 1 W
• Outputs (redundant): 24 V AC/DC relays, 1 A
• Option: 8.2 kΩ parallel resistor

General Information

• Range: 100 m under optimal conditions
• Protection rating: IP65 (except XRF-RD = IP20)
• Certifications:
  EN ISO 13849-1 (PL d, Cat. 3)
  EN 300 220
  EN 301 489

Note:
ExpertSystem XRF signal transmission systems are type-tested in combination with Bircher edge sensors.
Technical specifications and recommendations regarding our products are based on experience and are intended as guidelines for the user. Information in brochures and data sheets does not guarantee any specific product characteristics. This does not apply to specific product characteristics that we confirm in writing or on a case-by-case basis. We reserve the right to make changes due to technical advancements.