Sensor solutions

Folding doors

Sensors for folding doors

The radar motion detectors and loop detectors from BBC Bircher Smart Access reliably activate your automatic folding door.
While radar motion detectors detect practically any movement and thus trigger an opening impulse on the door, the loop detector switches when it detects metallic vehicles.

We recommend installing electrical safety edges on the closing edges to protect against pinching or crushing. The ExpertSystem XRF wireless radio transmission system has proven itself for wear-free data transmission. This ensures the best possible safety around your folding door.

Download industrial doors brochure

Hercules 2E

ProLoop

ExpertSystem XL

ExpertSystem XRF

Activation

Radar field for activation with Herkules 2E or Helios 2T

ESM, EMP & ES Button

Hercules 2E

Radar motion sensor for industrial doors

Zum Produkt

ProLoop

Loop detectors for industrial gates, barriers, parking systems, and bollards

Zum Produkt

ExpertSystem XL

Modular safety edge system for door applications

Zum Produkt

ExpertSystem XRF

Wireless signal transmission system for door applications

Zum Produkt

Technical data

Device dimensions (W × H × D)

XRF-T.2 (Transmitter): 50 × 121 × 23 mm
XRF-TI (transmitter): 18 × 194 × 18 mm
XRF-R.1 (receiver): 50 × 121 × 23 mm
XRF-R.2 (receiver): 75 × 121 × 24 mm
XRF-RD (receiver): 22.5 × 94 × 91 mm
XRF-TW (transmitter): 66 × 58 × 16 mm
XRF-TW (Magnet): 66 × 17 × 16 mm

Electrical Specifications

Frequency

868 MHz

Transmitter XRF-T.2, XRF-TW

Operating voltage: 3 V lithium battery (CR2450N)
Battery life: Typically 1.2 years

XRF-TI Transmitter

Operating voltage: 3.6 V inorganic lithium battery
Battery life: Typically 7 years

Receivers XRF-R.1, XRF-R.2, XRF-RD

Operating voltage: 12–36 V AC / 48–62 Hz
12–36 V DC
Power consumption: Max. 1 W
Outputs (redundant): 24 V AC/DC relays, 1 A
Option: 8.2 kΩ parallel resistor

General Information

Range: 100 m under optimal conditions
Protection rating: IP65 (except XRF-RD = IP20)
Certifications:
EN ISO 13849-1 (PL d, Cat. 3)
EN 300 220
EN 301 489

Note:
ExpertSystem XRF signal transmission systems are type-tested in combination with Bircher edge sensors.
Technical specifications and recommendations regarding our products are based on experience and are intended as guidelines for the user. Information in brochures and data sheets does not guarantee any specific product characteristics. This does not apply to specific product characteristics that we confirm in writing or on a case-by-case basis. We reserve the right to make changes due to technical advancements.