Sensor solutions

Vertical doors

Sensoren für Vertikaltore

Sensors for vertical doors

 

Various sensor components are available for the safe opening and closing of your vertical doors. BBC Bircher Smart Access offers you a comprehensive range of door sensor systems.

The tried and tested loop detectors can be used to activate the vertical doors. However, a radar movement detector such as the Herkules 2E is also ideal.
Electric safety edges can be used at the main closing edge. These offer the best protection for people and vehicles against being crushed or trapped in the door.

For reliable signal transmission, we recommend the ExpertSystem XRF wireless radio signal transmission system.

Download industrial doors brochure

Helios 2T
ProLoop

Activation

Radar field for activation

Security

AIR curtain for presence detection

ExpertSystem XL
LBGate
ExpertSystem XRF

Helios 2T

Radar motion and AIR presence sensor for industrial doors

ProLoop 2

ProLoop

Loop detectors for industrial gates, barriers, parking systems, and bollards

ExpertSystem XL

ExpertSystem XL

Modular safety edge system for door applications

LBGate

Photoelectric sensors for detecting people, objects, and vehicles

ExpertSystem XRF

ExpertSystem XRF

Wireless signal transmission system for door applications

Zum Produkt

Technical data

Device dimensions (W × H × D)

  • XRF-T.2 (Transmitter): 50 × 121 × 23 mm
  • XRF-TI (transmitter): 18 × 194 × 18 mm
  • XRF-R.1 (receiver): 50 × 121 × 23 mm
  • XRF-R.2 (receiver): 75 × 121 × 24 mm
  • XRF-RD (receiver): 22.5 × 94 × 91 mm
  • XRF-TW (transmitter): 66 × 58 × 16 mm
  • XRF-TW (Magnet): 66 × 17 × 16 mm

Electrical Specifications

Frequency

868 MHz

Transmitter XRF-T.2, XRF-TW

  • Operating voltage: 3 V lithium battery (CR2450N)
  • Battery life: Typically 1.2 years

XRF-TI Transmitter

  • Operating voltage: 3.6 V inorganic lithium battery
  • Battery life: Typically 7 years

Receivers XRF-R.1, XRF-R.2, XRF-RD

  • Operating voltage: 12–36 V AC / 48–62 Hz
    12–36 V DC
  • Power consumption: Max. 1 W
  • Outputs (redundant): 24 V AC/DC relays, 1 A
  • Option: 8.2 kΩ parallel resistor

General Information

  • Range: 100 m under optimal conditions
  • Protection rating: IP65 (except XRF-RD = IP20)
  • Certifications:
    EN ISO 13849-1 (PL d, Cat. 3)
    EN 300 220
    EN 301 489

Note:
ExpertSystem XRF signal transmission systems are type-tested in combination with Bircher edge sensors.
Technical specifications and recommendations regarding our products are based on experience and are intended as guidelines for the user. Information in brochures and data sheets does not guarantee any specific product characteristics. This does not apply to specific product characteristics that we confirm in writing or on a case-by-case basis. We reserve the right to make changes due to technical advancements.

Further sensor solutions

Downloads

Show all downloads